Re: trouble burning the bootloader to atmega 328

Home Evil Mad Scientist Forums Microcontrollers trouble burning the bootloader to atmega 328 Re: trouble burning the bootloader to atmega 328

#20820
Windell Oskay
Keymaster

There is supposed to be a line above that one, saying what it actually read– the “expected signature” line always follows that if the value is wrong.  It should be something like “avrdude: Device signature = 0x1e9514  .

You may need to just scroll up a line to see it.  

If you’re doing this from within the Arduino IDE, you may need to turn on verbose mode in the preferences.