Re: Bulbdial pc synchronization problem

Home Evil Mad Scientist Forums Clock Kits Bulbdial pc synchronization problem Re: Bulbdial pc synchronization problem

#22012
Carl
Participant

Alright, after perusing the Bulbdial code again, I see where the clocks serial port is setup at 19200 baud and the time header needs to be a byte equivalent to 255 (FF). the current sample Process Sketch has the baud set at 9600 and is sending a time header of “T”. after modifiying the sketch a little it know syncs up to the bulbdial.

I’ve uploaded the modified Process sketch to use to send the time to the bulbdial clock. hope this helps other.

https://www.dropbox.com/sh/fxomey4iiwi19tu/AAAjCjVYhKgml3QgB_xOlVSJa?dl=0