Re: Programming a diavolino.

Home Evil Mad Scientist Forums Microcontrollers Programming a diavolino. Re: Programming a diavolino.

#20787
Windell Oskay
Keymaster

Likely not hopeless; the FTDI chips are pretty well supported, and generally can be made to work one way or another. (I do not have the same level of confidence with respect to the leostick.)

See if you can map your adapter onto the “standard” FTDI cable pinout, to make sure of which pin is supposed to go where, and make sure that your environment is set up correctly: right port and board type and all that.