January 8, 2016 at 1:49 am #22351
Nope, that’s not normal. I would suggest checking your EBB to ensure that there isn’t any stray debris shorting the button. Also check the pins near the servo motor cable to make sure they aren’t bent and possibly shorting each other. You might also try pressing the button during a print to see if you get the same behavior. It’s possible that pressing or flicking the button to see if was semi-stuck could solve the issue.
Would you let us know what type of EggBot you have? Does the EBB have a checkmark on the end of the row of screw terminals?
If those possibilities don’t pan out, please contact us about sending your EBB in for inspection.