Re: Some LEDs Not Lighting During Test

[Quantum_Star]

Making progress! So, I accidentally found that the connection between the chip, top pin #6 from the left was not soldered properly. I re-heated that joint and flowed in a bit more solder properly, and now every light works besides D24. When it gets to this one, it lights up several LEDs dimly (not including D24). I will keep trying to troubleshoot this one, any advice would be appreciated.

Success! I fixed the solder on that particular LED, and now it works! :D

I would recommend to anyone else having issues, try to make the connection manually not between two points necessarily, but between the component and the hole it should be sitting in using one of the snipped off resistor legs, from the top.

Thanks again for your help Windell :)