- This topic has 1 reply, 2 voices, and was last updated 3 years, 6 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Getting the error: Failed to connect to EggBot. :( in the EggBot controls I am running Mac OS Big Sur 11.1 and Inkscape 1.0.1. Any help would be amazing! Thanks!!
First, make sure that you’re running the latest version of the EggBot software (which is included with the AxiDraw software installer).
Next, disconnect the EggBot — both power and USB. Restart your computer. Plug in USB only, not power, for the moment. Open Inkscape, and try and connect.
If you still aren’t able to connect, try a different USB cable if you have one available, and/or a different port on your computer.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
