Help With Programming Meggy Jr RGB

Home Evil Mad Scientist Forums Ask an Evil Mad Scientist Help With Programming Meggy Jr RGB

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #20070

    Hi There.
    I have just gotten into programming my Meggy and have thoroughly read the Programming Guide. I think I have the basics. I have been trying to make a program that makes a green dot appear at 0,3 and if I press the up button, it erases the dot at 0,3 and draws a green dot at 0,4. Kind of the same thing for the down button. If it is pressed the dot at 0,4 gets erased and a dot appears at 0,2. If I pressed up again 0,2 would vanish and 0,4 would appear. That was the plan anyway.
    It hasn’t been working though. The best I have gotten is a dot at 0,3 and 0,4 when up is pressed and 0,3 and 0,2 when down is pressed.
    I have tried nearly every single variation I can think of.
    Does anyone know how to write a program with the Meggy Simplified Library like I have described above?

    Windell Oskay

    Have you been able to get some of the existing simple demos to work, such as MeggyJr_CheckButtonsPress and MeggyJr_EasyDrawDots?  


    I do not know if there is a library for that, but I would recommend checking some of your statements and making sure that they weren’t limiting the abilities of the dot.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.