ISP Shield not responding

Home Evil Mad Scientist Forums Other kit and product support ISP Shield not responding

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20397
    astronouth7303
    Participant

    We just got an assembled an ISP emulator shield last week. I come in this morning to try it. I’m able to successfully load the ArduinoISP sketch. But when I try to program a chip, I get the error (verbose set):

    Arduino: 1.0.5 (Linux), Board: "Arduino Duemilanove w/ ATmega328"
    /home/james/.local/arduino/hardware/tools/avrdude -C/home/james/.local/arduino/hardware/tools/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P/dev/ttyACM0 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xDA:m -Ulfuse:w:0xFF:m

    avrdude: Version 5.11, compiled on Sep 9 2011 at 16:00:41
    Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
    Copyright (c) 2007-2009 Joerg Wunsch

    System wide configuration file is "/home/james/.local/arduino/hardware/tools/avrdude.conf"
    User configuration file is "/home/james/.avrduderc"
    User configuration file does not exist or is not a regular file, skipping

    Using Port : /dev/ttyACM0
    Using Programmer : stk500v1
    Overriding Baud Rate : 19200
    avrdude: Send: 0 [30] [20]
    avrdude: Send: 0 [30] [20]
    avrdude: Send: 0 [30] [20]
    avrdude: ser_recv(): programmer is not responding
    avrdude: stk500_recv(): programmer is not responding

    avrdude done. Thank you.

    I’m using Arduino v1.0.5 and an Arduino Mega 2560 (from SainSmart). I’m programming an ATMEGA328P-PN in the socket with the Arduino board set to Arduino Duemilonove w/ ATmega328 and Programmer set to Arduino as ISP.

    #21970
    Windell Oskay
    Keymaster

    Interesting. First, make sure that you’ve overridden the auto-reset.  

    Second, there have been quite a few reports of the mega2560 having issues with the Arduino as ISP process.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.