peggy 2 streaming live video problem Home › Evil Mad Scientist Forums › LED Matrix Kits › peggy 2 streaming live video problem This topic contains 5 replies, has 2 voices, and was last updated by Windell Oskay 3 years, 11 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts June 21, 2015 at 5:11 pm #20440 seanderParticipant hi, i built the peggy 2 kit and i’m trying to make streaming live video connection to it. i connected the SER option and i have FTDIfriend usb connection to the computer (which has green light while running my code) BUT the board doesnt respond to the input (all the lights on as default and arent changing) i’m not sure whats wrong, what should i do? (p.s i’m using red light leds, i dont know if it matters) APPENDIX the code that i’m using is from that project: http://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?article=1021&context=laessp This topic was modified 12 months ago by Windell Oskay. June 21, 2015 at 5:58 pm #22121 seanderParticipant June 21, 2015 at 5:59 pm #22122 seanderParticipant the picture shows the error i get when i’m trying to load the recvserial example to the peggy June 21, 2015 at 6:01 pm #22123 seanderParticipant and thats the ports i see in the arduino (after installing the FTDI driver) June 21, 2015 at 6:45 pm #22124 seanderParticipant NEVER MIND! ITS WORKING! WE DID IT! :) June 21, 2015 at 8:30 pm #22125 Windell OskayKeymaster Glad to hear that you got it sorted– what did the issue turn out to be? Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.