February 25, 2013 at 10:23 am #20193
Can Hershey Text handle any text font?I am running windows 64bit. I have a decent amount of fonts installed on my PCcan i print different texts using this tool or am I limited to the fonts provided by Hershey Tool?February 25, 2013 at 1:40 pm #21189
Inkscape natively handles the fonts already installed on your PC, and can write with them using its built-in text editing tools.The Hershey Text extension only *adds to* that set of fonts. The fonts that it contains are “engraving fonts” (by Mr. Hershey) which your PC cannot natively handle, because they are defined by the stroke width, rather than as an outline that gets filled in. These font types are so different that it is not possible (by any means) to convert an engraving font to or from an outline font.So, to answer your questions directly:(1) No, Hershey Text can only handle genuine engraving fonts.(2) While you cannot print system fonts from within Hershey Text, you are *not* limited to the fonts provided by Hershey Text. Inkscape handles your system fonts directly (and in many ways better), with the “normal” text tools.February 25, 2013 at 1:49 pm #21190
Thanks.Currently I use illustrator CS4 to draw. than save as svg. I open inkscape to plot only. Do i need to do anything with the font if there is any before plotting?.I try to do a cursive style yesterday just a 4 words but the eggbot started to act weird.February 25, 2013 at 2:42 pm #21191If the text comes into Inkscape as a set of curves (rather than as editable text), you do not need to do anything to it.If the text comes into Inkscape as editable text (rather than as a set of curves), you’ll need to convert it to curves before plotting. To do so, first select the text, and then from the Path menu, choose the option “Object to Path.”Can you say in which way the “Eggbot started to act weird?”February 25, 2013 at 2:59 pm #21192
ThanksSure:I was printing some basic geometric shapes and some cursive text. The Eggbot printed the geometric figures ok when it came to draw the text it when to one extreme end of the ball (top or bottom) and the arm started to swing and stop all in the same spot.February 25, 2013 at 3:20 pm #21193
It sounds like you may have had some extraneous lines or artifacts in your file that the Eggbot was trying to print, outside of the template area.A couple of things that you might try:– Import your file into Inkscape as an EPS drawing, rather than SVG. Illustrator SVG sometimes seems to have issues.– Check for extraneous lines or artifacts within Inkscape before printing. From the menu, select View>Zoom>Drawing, to show the full extent of items on your page. Then, Edit > Select All to highlight everything on the page.February 25, 2013 at 4:46 pm #21194
- You must be logged in to reply to this topic.