What value resistor for Octolively LEDs

Home Evil Mad Scientist Forums LED Matrix Kits What value resistor for Octolively LEDs

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20254
    fleetz
    Participant

    Hi Guys and Gals,

    The documentation is a little confusing as to what value resistors I should be using for R25 to R32 that supply the visible LED’s. The LED I will be using are some Ultra Bright green LED which I had to purchase from another supplier as EMS had none on stock. The LEDs are 10mm Ultra Bright Green that state require 20mA of current to provide the maximum brightness. 
    Could someone confirm what the values of the resistors should be please?
    Thanks and regards,
    Ian
    • This topic was modified 2 years, 4 months ago by Windell Oskay.
    #21440
    Lenore Edman
    Keymaster

    82 ohms for white, green or blue LEDs (220 ohms for red). You can find that information in the bill of materials on the documentation site here: http://wiki.evilmadscientist.com/Octolively

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.