azinpa

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Hatch update problems #22652
    azinpa
    Participant

    Thanks Windell will do,  At least it is up and running now.

    in reply to: Hatch update problems #22650
    azinpa
    Participant

    ok have completely removed Inkscape and anything that was left over from both programs and programs x86. reinstalled Inkscape 64.  Inkscape only shows up in Program Folder at this point. then download eggbot2.7.1_win.zip unzipped and copied the files to the extensions folder, started Inkscape and the new hatch fill shows up where it is supposed to. Now at this point do I need to copy those 3 plotink files also? 

    in reply to: Hatch update problems #22648
    azinpa
    Participant

    ok removed the egg bot hatch files from the extensions  folder. started Inkscape and hatch fill is gone from eggbot contributed.  copied the new egg bot hatch files to the extension folder. started Inkscape and checked eggbot menu and hatch fill is not there.   Is it normal to have inkscape in both the programs folder and Programs x86 folder?

    in reply to: Hatch update problems #22646
    azinpa
    Participant

    Ok, yes, upgrading to new hatch fill extension, have loaded the  the eggbot_hatch.inx, eggbot_hatch.py files. started Inkscape and the look under EggBot extensions menu and no Hatch Fill. Just downloaded the 3 files from plotink. Installed them. started Inkscape and hatch fill still does not show up in the eggbot drop down. the old version is still in eggbot contributed menu.

    The hatch files were copied from github, and had a date of march on them.
    And only one copy of Inkscape on the machine.

    in reply to: erratic stepper motor and pen servo #22413
    azinpa
    Participant

    Windell: Well I powered down the egg-bot last night. Powering it up this am, I have no control voltage to the steppers or the pen servo. No matter the location of the pot, min, midway max. Could all the erratic behavior yesterday been the pot or the ebb starting to fail? With failure this morning. The led for 3.3v is lite and usb connection are on and flashing normaly.  And the computer is seeing the egg-bot.

Viewing 5 posts - 1 through 5 (of 5 total)