[Hal]

Sorry about being a little dense, but how do I email you to attach a vector diagram, or how can I do that on the forum?

[Hal]

Thanks Windell.  That’s what I’m getting at, and a solution.  So for a more complex figure (I don’t know how to show one like you did) one would need to go through a lot of convolutions.

[Hal]

I don’t really want to show the fill. Try this – draw a circle with a white fill, duplicate it twice and overlap them like a venn diagram.  Don’t adjust anything so that circles are in front of each other.  Can that figure be drawn by eggbot, without showing the complete circles?  Without the fill one sees three complete circles.

[Hal]

I stand corrected – by using Path, Union command eggbot does what I want it to do.  I’ll have to go back to the drawing I was working on to see where I went wrong.

[Hal]

I see what  you mean, Windell.  But what I want is for the fill to be, say white, so that only the outline of the objects is seen.  If you have two circles slightly offset with no fill you see two circles, but with a fill you will see only on full circle, or if you do a union you see a constricted oval.  Is there a way for eggbot to draw those?

[Author]

Posts